1. IMPORTANT: When windows installation asks you to choose an HDD where Windows will be installed, choose Load driver, Browse, choose FDD B/storage/2003R2/AMD64 or x86, (AMD or x86 depends which version of windows you are installing 64 or 32 bit), click next and you will see HDD RedHat VIRTIO SCSI HDD now.
2. Aug 19, 2016 Windows Driver The Windows drivers for the Juniper Networks BX Series System Console product can be found attached to this article. The driver includes support for Windows XP and 7 (32-bit) (Juniperwindowsxp732bit.zip) and Windows 7 and 10 (64-bit) (Juniperwindows71064bit.zip).
3. Step 1 - Download Your Driver To get the latest driver, including Windows 10 drivers, you can choose from a list of most popular Juniper Networks downloads. Click the download button next to the matching model name. After you complete your download, move on to Step 2.

Jan 11, 2016 Juniper Network Connect Software Downloads Posted By Mark Lang on Jan 11, 2016 1 comment I am tired of walking people through the billion steps you need to take in order to configure your WEB BROWSER to be able to download the INSTALLER file for the VPN to connect to the Stony Brook Network.

The services gateway is shipped with the JuniperNetworks Junos operating system (Junos OS) preinstalled and readyto be configured when the device is powered on. You can perform theinitial software configuration of the services gateway by using thebrowser-based setup wizard or by using the command-line interface(CLI).

SRX300 Services Gateway Factory-Default Settings

The SRX300 device is shipped with the following factory-defaultsettings:

Table 1: Security Policies

Table 2: NAT Rules

Table 3: Interfaces

The SRX300 device is shipped with the following services andprotocols enabled by default.

Table 4: Services, Protocols, and Startup Mode

To provide secure traffic, a basic set of screens are configuredon the untrust zone.

How to View Factory-Default Settings

To view the factory-default settings on your device:

1. Log in as the root user and provide your credentials.
2. View the list of default configuration files:
3. View the required default configuration file.
   load factory-default command to revert to the factory-default configuration.

   Initial Configuration Using the CLI

   You can use either the serial or the mini-USBconsole port on the device.

   Connect to the Serial Console Port

   To connect to the serial console port:

   1. Plug one end of the Ethernet cable into the RJ-45 to DB-9serial port adapter supplied with your SRX300.
   2. Plug the RJ-45 to DB-9 serial port adapter into the serialport on the management device.
   3. Connect the other end of the Ethernet cable to the serialconsole port on the SRX300.
   4. Start your asynchronous terminal emulation application(such as Microsoft Windows HyperTerminal) and select the appropriateCOM port to use (for example, COM1).
   5. Configure the serial port settings with the followingvalues:

      • Baud rate—9600

      • Parity—N

      • Data bits—8

      • Stop bits—1

      • Flow control—none

   Connect to the Mini-USB Console Port

   To connect to the mini-USB console port:

   1. Download the USB driver to the management device fromthe Downloads page. To download the driver for Windows OS, select Version drop-down list. Todownload the driver for macOS, select Version drop-down list.
   2. Install the USB console driver software:Note

      Install the USB console driver software before attemptingto establish a physical connection between the SRX300 and the managementdevice, otherwise the connection will fail.

      1. Copy and extract the .zip file to your local folder.

      2. Double-click the .exe file. The installer screen appears.

      3. Click Continue Anyway on the next screen tocomplete the installation.

         If you chose to stop the installation at any time during theprocess, then all or part of the software will fail to install. Insuch a case, we recommend that you uninstall the USB console driverand then reinstall it.

      4. Click Ports (COM & LPT) in Power button on the front panel. Verify thatthe

      5. Start the CLI.Note

         You can view the factory-default settings by using the

      6. Connect one end of the Ethernet cable to any of the networkports numbered 0/6 on the device.Note

         The ge-0/0/0 and ge-0/0/7 interfaces (ports 0/7) are WAN interfaces.Do not use these ports for the initial configuration procedure.

      7. Connect the other end of the Ethernet cable to the managementdevice.

         The SRX300 functions as a DHCP server and automatically assignsan IP address to the laptop.

      8. Ensure that the management device acquires an IP addresson the 192.168.1.0/24 network from the device.

         If an IP address is not assigned to the management device, manuallyconfigure an IP address in the 192.168.1.0/24 network.

         Note

         Do not assign the 192.168.1.1 IP address to the managementdevice, as this IP address is assigned to the SRX300.

      9. Open a browser and type https://192.168.1.1. The Phone Home Client page appears.
      10. To configure the device:

          • Using zero-touch provisioning (ZTP)—Follow the procedurein Configure the Device Using ZTP with Juniper Networks NetworkService Controller

          • Using J-Web—Click Submit.

            The J-Web login page appears. The SRX300 already has factory-defaultsettings configured to make it a plug-and-play device. So all youhave to do to get the SRX300 up and running is connect it to yourLAN and WAN networks.

          • Connect the WAN network to port 0/1 through

            • Guided Setup (uses a dynamic IP address)—Enablesyou to set up the SRX300 in a custom security configuration. You canselect either the Basic or the Expert option.

              The following table compares the Basic and Expert levels:

              Options	Basic	Expert
              Number of internal zones allowed	3	≥ 3
              Internet zone configuration options	Static IP Dynamic IP	Static IP Static pool Dynamic IP
              Internal zone service configuration	Allowed	Allowed
              Internal destination NAT configuration	Not Allowed	Allowed

              Note

              If you change the IP address of the port to which thelaptop is connected, you might lose connectivity to the device whenapplying the configuration in the Guided Setup mode. To access J-Webagain, open a new browser window and type https://Skip toJ-Web and configure the SRX300 using J-Web.